• Don't extend the front upper links!!!
• Some aftermarket servos will hit the hood and cause limited front suspension travel. You can use some spacers to raise the hood for more room. We are designing the V2 hoods now.

• If you find the holes difficult to align, you can start by fixing the skid plate to the body with 4 screws, then loosen 1 screw and put the link in.
• There is no space in the body for the stock battery strap. You can use a small piece of velcro.

• Unassembled kit
• Nylon Injection Molding
• Tube roll cage, very light and firm
• Equipped with roof LED light and Y wire
• No rails needed

• 🕷️ INJORA Rock Tarantula 🕷️
• Material: Nylon
• Color: Clear, Black, Blue, Green, Red, Orange
• Use Voltage of Lights: 5-7V
• Weight: 48g (1.69oz)
• Size: 201*81*62mm (7.91*3.19*2.44in)

Package List:
1 * Buggy Body Shell

Required tools:

• 1* 0.05" hex screwdriver (1.27mm or 1.3mm is also fine)
• 1* 1.5mm hex screwdriver