🔹 Non-SORRCA C2

• Tires: Max 4.75”, may be cut, grooved, or trimmed. No pin tires.

• Max wheel size: 2.2”

• Full body only (no cab-only). Flatbeds allowed, must be as long as frame rails.

• Dovetailing & pinching allowed (width must remain within ½” of cab).

• Rail chassis only (any material). No tube frames.

• Front bumper required (wider than frame rails, mounted or molded in).

• Rear bumper optional.

• No MOA, Dig, or unlocking diffs.

• No battery on axle.

🔹 Box Stock

• Truck must be completely stock, as sold by manufacturer.

• Only upgrade allowed: Steering Servo.

🔹 Beginner

• Same as Box Stock, but for new drivers only.

• Perfect for first-time competitors or borrowed rigs.

🔹 Class 2 RTR

(If you Run Class 2 NON-SORRCA YOU CAN'T RUN THIS CLASS)

THIS CLASS IS FOR THE NOT SO EXPERIECNED TO START WORKING THERE WAY UP

• RTR-based rigs with light mods.

• Tires: Stock or upgraded, no cutting/grooving/trimming. Max 2.2” wheels.

• Stock frame & axles from RTR must be used.

• Electronics may be upgraded.

🔹 Class 3

• For rigs that don’t fit other classes (custom builds, Capra, 4WS, etc.).

• Tires: Max 6”, may be cut/grooved/trimmed. No pin tires.

• Max wheel size: 2.2”.

• No MOA or battery on axle.

• 4WS, Dig, Selectable OD all allowed.

• Bumpers not required.

🔹 1.9 Mini

• Follows WRCCA rule set.

📏 Course Rules

• Gate Widths:

  • C2, Beginner, Box Stock, C2 RTR, 1.9 Mini → 12” min

  • C3 → 16” min

• Each course: Minimum 10 gates.

• Progress = Rear tires clear gate line. Once cleared, gate is dead.

⛓ Penalties

• Course Direction (wrong way): +10

• Gate Marker: +10

• Boundary: +10

• Reverse: +1

• Reposition (pick up & reset): +10

• Rollover (side-to-side only): +5

• Self Recovery (winch): +3

• Assisted Winch (judge pulls rig): +6

• On-Course Repair (touch rig): +10 (time continues)

• Off-Course Repair (OJ): +10 & -1 minute (30 min max to fix, restart at last gate)