3Flow9 Cascade 4WS Rear Servo Mount

Finally a servo mount specifically for rear steering in mind. Using the Cascade Micro servo which has a small footprint and only 8 grams helps tremendously with a 60/40 weight bias for 4WS and allows for 4 Anti-squat adjustments. The Cascade Servo 4WS A-S Mount is made from strong 7075 Aluminum, anodized black with laser etching. Includes one No Wobble Spacer for Super 8 Axles ****This mount specifically uses the 3Flow9 RC Cascade Micro Servo.****

This mount will NOT fit Injora Diamond axles

This mount will NOT fit MEUS Isocentric axles without modification.

Combine the Cascade Servo Mount, Cascade Servo and Cascade Servo Horn for a combo discount.  Use code FlowCubed

Anti Squat explained:

A high Anti-Dive value will help keep your front end down on steep climbs transferring power to the tires and not the chassis but also lifts the rear end slightly under hard acceleration which forces the front end down.

 A low anti-dive value under 100% will cause the front suspension to compress under braking called nose-dive. Under acceleration a low anti dive geometry will cause the front end to lift and the suspension to unload which also shifts weight to the rear of the truck. This good for faster trucks on dirt, helps rock bouncers keep the suspension extended during a climb and for mud drag racing. Your chassis and link setup will determine your final values. Good measure to find your values on your tuck and even better to just test each configuration out

 Anti-Dive above 100% is good for hardcore technical rock crawling

 Anti-Dive below 100 % is good short course racing, rock bouncers, mud trucks