Dual Motor 70amp Silent Assassin ESC/ESCAPE32 Firmware

Dual 70 amp Silent Assassin Esc. ESCape32 firmware. Don't forget to purchase a wifi programmer!

(If you need this programmed for brushed motors only). Please put that in the notes section, or else it WILL come programmed for brushless motors.

This esc is conformal coated. 

This dual esc is great for your dual motor transmission, or your motor on axle crawlers.

1 battery input, uses 2 channels on your receiver so you can program dig for the front or rear, also adjust overdrive/underdrive on the fly from your transmitter.

*BEFORE YOU CHECK OUT, CLICK ON YOUR CART ICON, THEN PUT WHAT MOTOR KV YOU NEED THE ESC SET AT IN THE (ORDER SPECIAL INSTRUCTIONS) BOX, These are for pre-order. Expect up to 4 business days for your order to ship. Weekend's not included.

This esc will make your outrunner or inrunner silent! Comp crawler or trail truck.

Only esc on the market that has protection, so you don't fry your direct power servo.

Comes standard with 2 jst plugs.

XT60 or XT30 battery plug.

Internal BEC - 8.4v

* YOU WILL NEED A EXTERNAL BEC (LIKE CASTLE CREATIONS) OR SIMILAR, TO POWER ON YOUR RECEIVER AND "NON" DIRECT POWER SERVO'S. INTERNAL BEC IS FOR DIRECT POWER SERVO EQUIPPED CRAWLERS ONLY! *



*70 amp esc. 5 amp BEC
*3-4s capable input,
auto detects the lipo cell count
*Thermal protection
*heat sink for those hot summer days
*Low voltage protection
*ESCape32 firmware. 
*Sinusoidal startup
*Rpm lock
*8Lb weight limit,
(with proper gearing, transmission and motor kv)
*Up to 2500kv on 4s, (10 pole)
*Up to 2200kv on 4s (14 pole)
*Up to 2500kv on 3s (14 pole)
*Works with outrunner or inrunner motors
*Built in servo protection
*Makes your outrunner/inrunner motor silent